[Detect]
Version=5.0

[enu]
IDS_TITLE = Insert Drivers Disk
IDS_INSERT_TEXT = Please insert the floppy diskette labeled "Drivers Disk" into your floppy drive, enter the correct drive letter for your floppy drive into the edit field below, and click OK.
IDS_DISK2_TEXT = Please insert Disk #2 and click OK.
IDS_SKIP_DRIVERSDISK = You have chosen to not use the Drivers Disk.  It is strongly recommended you proceed with the Drivers Disk installation.  The Drivers Disk is necessary to perform device driver installation for your SCSI Host Adapter(s).  Do you still want to skip the Drivers Disk installation?
IDS_SKIPDISK = Skip Drivers Disk?
IDS_DRIVERSDISK_ID = EZSCSI50.INI
IDS_EZSCSI_VER = 5.0
IDS_WRONG_EZVERSION = You are trying to use an incorrect version of the EZ-SCSI Drivers Disk for this installation.  You need the %s version of the Drivers Disk to install this version of EZ-SCSI.
IDS_APPNAME = Adaptec EZ-SCSI
IDS_UNABLE_TO_OPEN_IDFILE = Unable to find Drivers Disk.  Please verify the path entered and try again.
IDS_SKIP_WARNING_MSG = You may skip this process by clicking Skip.  However, it is suggested that you proceed with this Drivers Disk installation.  The Drivers Disk is necessary to perform device driver installation for your SCSI Host Adapter(s).
IDS_TEMPDIR = ~adpttmp\
IDS_GETTING_READY_TO_COPY = Reading list of device drivers from Drivers Disk...
IDS_EZPATCH_DAT = EZPTCH32.DAT
IDS_CDROM_FINISHED = Finished copying device drivers from "Drivers Disk".  Click OK to continue with EZ-SCSI Setup.
IDS_OK = OK
IDS_NOT_ENOUGH_SPACE = Not enough free space on your hard drive. Please free some space and try again.  Setup requires about 4 MBytes of disk space.
IDS_NO_TEMP_DIR = Error! Unable to create temporary directory for installation files and drivers.  Please exit and try again.
IDS_NO_EZPATCH_DAT = Error! Unable to read setup file "EZPTCH32.DAT".  Make sure floppy is inserted correctly and try again.
IDS_DRIVER_DISK_LOCALE = enu
IDS_CANNOT_FIND_SETUP = Error!  EZ-SCSI Setup is unable to find the main setup file to install EZ-SCSI 5.0.
IDS_WRONG_DISK = Disk#2 has not been inserted into the floppy drive.  Please insert Disk#2 and try again.
IDS_EXIT_SETUP = This will exit the EZ-SCSI Setup.  Do you want to exit Setup?
IDS_CDROM_COPYDRIVERS = Copying device drivers from Drivers Disk.  Please wait...
IDS_FLOPPYSTART = Setup is preparing to install EZ-SCSI.  Please wait...
IDS_FLOPPY_FINISHED = Setup has completed copying necessary setup files to your system. Click OK to continue with Setup.
IDS_COPY_TEXT = Copying device drivers from Drivers Disk.  Please wait...
IDS_WINDOW_TITLE = Adaptec EZ-SCSI 5.0 Setup
IDS_FLOPPY_INFO = Please click OK to begin the EZ-SCSI 5.0 Setup process.
IDS_FLOPPY_TITLE = Welcome to EZ-SCSI 5.0 Setup
IDS_OK = OK
IDS_CANCEL = Cancel
IDS_SKIP = &Skip
IDS_EXIT = Exit
IDS_INSTALL = Install:
IDS_SETUP_NOT_FOUND = Unable to locate the setup file for %s.
IDS_MASTER_TITLE = Master Setup